Lidija Avsenik (2016) Alternative rejuvenator as an additive to increase the share of reclaimed asphalt in asphalt mixture. PhD thesis.
Ana Benčina (2016) Possibilities of use and limitations of boards made of packaging waste. MSc thesis.
Sebastijan Robič (2016) Application of waste plastic in concrete composites. MSc thesis.
Nino Špan (2016) Introduction of new norms from the area of concrete in Boštanj concrete plant. EngD thesis.
Anja Vavričuk (2016) Influence of metakaolin on properties of injection grouts prepared by natural hydraulic lime. EngD thesis.
Egon Milost (2016) Effect of cementitious additives on corrosion processes of steel in green concretes. MSc thesis.
Robert Trebušak (2016) Comparison of properties of concrete mixtures made of natural and recycled aggregate. EngD thesis.
Erik Premk (2016) Lime-cement injection grouts with white cement. EngD thesis.
Gregor Merlin (2016) Influence of chemical and mineral admixtures on rheological properties of fresh cement mortars. EngD thesis.
Janja Resman (2016) Influence of content and grain size distribution of recycled aggregate on concrete properties. EngD thesis.
Andrej Faletič (2016) Methods for determining shrinkage of cementitious systems. EngD thesis.
Andrej Pezdirc (2016) Utilization of waste tires as alternative fuel in cement plant. EngD thesis.
Teja Kržišnik (2016) Anaerobic digestion of biodegradable substrates. EngD thesis.
Sašo Seljak (2016) Concrete roads - comparison of regulations and concrete mixture design. MSc thesis.
Bojan Kresal (2016) Influence of chemical admixtures on rheological properties of fresh concrete. EngD thesis.
Mateja Vasić (2016) Influence of binder type on the properties of restoration renders. EngD thesis.
Andreja Padovnik (2016) Consolidation of detached plaster layers of mural paintings with non-structural grouting. PhD thesis.
Jure Klopčič, gradbenik (2015) Development of lightweight self - compacting concrete with declared properties. MSc thesis.
Rok Bregar (2015) Application of ultrasound method to determine characteristic parameters of the cement setting process. EngD thesis.
Sara Mikec (2015) Comparison of Slovene and German waste packaging systems. EngD thesis.
Jošt Kozelj (2015) Handmade fired brick production. EngD thesis.
Ana Frankovič (2015) Fly ash aggregate developed by means of cold-bonding. EngD thesis.
Zvonka Benko (2015) Influence of chemical additives and alkaline conditions on properties of lime-based injection grouts with dolomite powder. EngD thesis.
Petra Štukovnik (2015) Influence of environment on the historical material with mineral binder. PhD thesis.
Danijel Benko (2014) Testing rheological properties of fresh concrete at different ratios of limestone powder and chemical stabilizer. EngD thesis.
Janez Mikec (2014) Slippage of thermal insulation under foundation slab subjected to seismic load. EngD thesis.
Tomaž Šeruga (2014) Repair of reinforced concrete structure of outlet channel of the Šmartinsko lake. EngD thesis.
Matevž Štokelj (2014) EAF C slag influence on physical and mechanical properties of concrete. EngD thesis.
Maja Jelen (2014) Use of demolished building waste in concrete composites. EngD thesis.
Dora Kovač (2014) Effect of binding accelerators and lightweight aggregate fillers on the performance characteristics of lime-based injection grouts. EngD thesis.
Jernej Zagorc (2014) Influence of carbonate aggregate type on properties of mortars and concretes. EngD thesis.
Anita Turk (2014) Wood ash as a secondary binder in concrete. EngD thesis.
Petra Franko (2014) Influence of salts impact on restoration plasters. EngD thesis.
Jože Maver (2014) Rheology of fresh self-compacting concretes and mortars with the same specific surface of aggregate grains. EngD thesis.
Jure Zabret (2014) Influence of carbonate aggregate type on mechanical properties of mortars. EngD thesis.
Andraž Hočevar (2013) Rheological properties of cementitious composites in fresh state. PhD thesis.
Karmen Jazbec (2013) Infrared thermography as method for detection of self-compacting concrete segregation. EngD thesis.
Aleš Česen (2013) Monitoring and characterization of corrosion processes on steel in concrete. PhD thesis.
Aleš Miketič (2013) Self - compacting concretes with expanded clay aggregate. EngD thesis.
Florijan Rot (2013) Exposure classes as a starting point for determining the characteristics of RC structural elements. EngD thesis.
Jan Šircelj (2013) Scaling resistance of concrete surfaces exposed to deicing chemicals. EngD thesis.
Lucija Stermšek (2013) Influence of additives on properties of lime - based injection grouts. EngD thesis.
Maja Weisseisen (2013) Influence of the environment on the state of the cultural heritage in Upper Carniola, Slovenia. EngD thesis.
Sebastijan Robič (2013) Application of white slag in concrete composites. EngD thesis.
Ana Benčina (2013) Use of ruins from the area of old zinc works in concrete composites. EngD thesis.
Alja Arrigler (2013) Studies of retrofitting measures for stone masonry walls. EngD thesis.
Nejc Gašperič (2013) Influence of aggregate grain size distribution and superplasticizer type on fresh concrete rheology. EngD thesis.
Jožef Klepec (2013) Influence of water - to - cement ratio and superplasticizer content on rheological propetries of fresh cement mortars. EngD thesis.
Boris Ronkalj (2012) The influence of chemical aggression on the concrete at different temperature. EngD thesis.
Alen Lešnik (2012) Influence of aggregate and mineral additive type on the rheological and mechanical properties of highly flowable concrete. EngD thesis.
Blaž Štupar (2012) Influence of height of rheometer's inner cylinder on measured rheological properties of mortars. EngD thesis.
Blaž Hren (2012) Development of CEM method for estimation of rheological properties of fresh concrete. EngD thesis.
Nejc Andrejka (2012) Influence of mineral additives on rheological properties of fresh concrete. EngD thesis.
Uroš Erdani (2012) Comparison of rheological properties of fresh mortar and concrete with the same surface area of aggregate grains. EngD thesis.
Nuša Černe (2012) In-situ and laboratory analysis of historical mortars. EngD thesis.
Maša Kušar (2012) Mechanical properties of highly flowable and self-compacting concrete mixtures. EngD thesis.
Primož Novak (2011) Properties of Lime Renders Applied to Stone Masonry Wall of the Črnelo Castle Chapel. EngD thesis.
Mitja Mlakar (2011) Deterioration procesess of reinforced concrete in nuclear power plants. EngD thesis.
Goran Šneperger (2011) Assessment of stability of fresh scc with electrical conductivity. EngD thesis.
Mojmir Uranjek (2011) Degradation and sustainable renovation of heritage buildings envelope. PhD thesis.
Matej Mihelič (2011) Synthetic composite material kerrock and its application in civil engineering. EngD thesis.
Anže Andrejka (2011) Efficiency of rc bridges repair under traffic load. EngD thesis.
Damjana Gligić (2011) Historical overview of cement production and use of concrete in Slovenia. EngD thesis.
Luka Lampret (2011) The use of straw bales as a construction material in ecological buildings. EngD thesis.
Katja Mešiček (2011) Assessment of stability of fresh mortars with electrical conductivity method. EngD thesis.
Gašper Koželj (2010) Water penetration resistance of easily workable concrete made of gravel from the river Sava in the Krkška basin. EngD thesis.
Igor Birk (2010) Resistance of highly fllowable concrete made from crushed limestone aggregate. EngD thesis.
Borjan Kokolj (2010) C&D re-use and recycling with emphasis to petrous materials. EngD thesis.
Urška Pajk (2009) The influence of different grinding aids on the characteristics of cement CEM V/A (S-V-P) 42,5 N LH. EngD thesis.
Slaviša Kuzmanović (2009) Influence of weak parts in concrete structure on resistance of concrete to water penetration. EngD thesis.
Matej Kodelja (2009) Efficiency study of superplasticizers to ensure durability of concrete placed by pump.. EngD thesis.
Matej Božič (2009) Compatibility and bond strength between polymer modified concrete and base concrete. EngD thesis.
Matej Zavasnik (2009) Thermal and Hydric Compatibility of the Chosen Types of Natural Stone and Concrete in Building Industry Applications Scope and supporting material: 130 pp., 22 spreadsheets, 93 images, 7 equations. EngD thesis.
Gregor Trtnik (2009) The use of ultrasonic method to monitor the setting and hardening process of concrete. PhD thesis.
David Duh (2008) Self-compacting and vibrated concretes with limestone powder. PhD thesis.
Vedran Bekrić (2008) Comparison of experimental methods for determination of moisture in floor screeds. EngD thesis.
Lovro Cimperman (2008) Influence of consistency and air content in fresh concrete on characteristics of air bubbles in hardened concrete. EngD thesis.
Tina Bremec (2007) The Use of Acoustic Technique on Concrete Specimens. EngD thesis.
Damjan Golob (2007) The influence of polymer latex type on mechanical and physical properties of mortars and concretes used for repair. EngD thesis.
Mitja Žnidaršič (2007) Influence of cosistency, air entraining agent and moist curing period on salt-frost scaling resistance of concrete with higher content of limestone filer. EngD thesis.
Andraž Hočevar (2007) The influence of types of cement on sulfate resistance of concrete. EngD thesis.
Klemen Kikelj (2006) Influence of lime type, additives and application tehniques on lime renders characteristics. EngD thesis.
Marko Turel (2006) Determination of characteristic compressive strength of self- compacting and vibrated concrete. EngD thesis.
