Items where Division is "Faculty of Civil and Geodetic Engineering > Department of Civil Engineering > Chair of Steel Structures"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: No Grouping | Creators | Date | Item Type
Number of items at this level: 114.

Blaž Rupnik (2016) Software for the design of beam to column connections according to the component method. MSc thesis.

Blaž Štupar (2016) Steel cable - stayed bridge over river Krka in Irča vas. MSc thesis.

Jan Mak Bevcl (2016) Assessment of remaining fatigue life of railway bridge over river Idrijca in Bača pri Modreju. MSc thesis.

Rok Morgan (2016) Resistance tables of IPE beam-to-beam connections with extended end plate. EngD thesis.

Andrej Veškovo (2016) Design of shopping centre. EngD thesis.

Rok Igličar (2016) Design of steel column bases. EngD thesis.

Žiga Plevel (2016) Analysis of steel building considering membrane action of slab during fire. EngD thesis.

Matej Toporiš (2016) Analysis of composite beam over two spans. EngD thesis.

Žan Sadar (2016) Dissipative elements in seismic resistant strel structures. EngD thesis.

Gabriel Alejandro Sušnik (2016) Analysis of damaged storage tank. EngD thesis.

Rok Seifert (2016) Shear connection between steel beam and timber panel. EngD thesis.

Jaka Dimnik (2016) Living space illumination using the internet of things. EngD thesis.

Nejc Jurejevčič (2016) Industrial steel hall with bridge grane. EngD thesis.

Gregor Nučič (2016) Structural design of a two storey office building and production facility. EngD thesis.

Andrej Klemenčič (2016) Printing of construction components; illusion or reality?. EngD thesis.

Armin Muminović (2016) Fire protection of steel structures. EngD thesis.

Robi Ponjavič (2016) Experimental analysis of bolted joints from FRP. EngD thesis.

Nejc Švent (2016) Aluminium structural elements. EngD thesis.

Aljaž Sitar (2016) Behaviour of modular unit corner subjected to flexural load. MSc thesis.

Damjan Alešnik (2016) Analysis of features and posible use of Tekla Structures for multi-material structural design in Slovenia. EngD thesis.

Borislav Majkić (2016) Influence of installation conditions on load capacity of bonded anchors for primary construction elements. MSc thesis.

Blaž Hudobivnik (2016) Automatic differentiation based solution of strongly coupled problems in engineering. PhD thesis.

Jan Hlastec (2015) Behaviour of singly symmetric steel profiles subjected to compressive force. MSc thesis.

Matjaž Podržaj (2015) Design of five story office building with emphasis on seismic design. EngD thesis.

Tadeja Košir (2015) Design of observation tower in steel. EngD thesis.

Jan Kuštra (2015) Design of three story industrial building with emphasis on seismic design. EngD thesis.

Luka Tavčar (2015) On the use of dual-steel moment resisting forms on seismic areas. EngD thesis.

Jana Gomboši (2015) Fire resistance of stainless steel structural elements. EngD thesis.

Marko Starešinič (2015) the use and integration of Tekla Structures components for steel connections' calculations. EngD thesis.

Boštjan Pohlin (2015) Structural design of a four story office building. EngD thesis.

Miha Berčič (2015) Project of the new steel roof structure and fire staircase of the UL FGG building. EngD thesis.

Marko Cilenšek (2015) Five-story apartment building with load bearing structure made of steel. EngD thesis.

Jan Gradišek (2015) Design of five story industrial building. EngD thesis.

Marko Jovanovski (2014) Stressed skin design of single storey steel buildings. MSc thesis.

Matjaž Beltram (2014) Methods for stability design of ring stiffened steel tanks. EngD thesis.

Klemen Ambrožič (2014) Project of industrial hall with a bridge crane. EngD thesis.

Danijel Jelušić (2014) Design of 400 kV transmission tower. EngD thesis.

Dominik Klemenčič (2014) Application of advanced method to assess fire resistance of steel building. EngD thesis.

Petra Vresk (2014) Steel footbridge over the Sava river in Radeče. EngD thesis.

Miha Tomažič (2014) Project commercial bouildings of spatial moment frame. EngD thesis.

David Kuzmič (2014) Design of industrial steel building. EngD thesis.

Marko Lavrenčič (2014) Influence of semi-rigid connection on global stability of frames. EngD thesis.

Tamara Šuligoj (2014) Behaviour of longitudinally stiffened plates subjected to uniform compression. EngD thesis.

Nika Ilovar (2014) Design of full strength connections. EngD thesis.

Jure Gačnik (2014) Seismic design of four-storey industrial building. EngD thesis.

Grega Žitko (2014) Structural designe of a five storey office building made in steel. EngD thesis.

Teja Melink (2014) Stochastic finite element method in structure modelling. PhD thesis.

Rok Stenko (2014) Stiffness requirements for transverse stiffeners in plate girders. EngD thesis.

Miha Ambrožič (2014) Full strength connections in seismic resistant buildings. EngD thesis.

Sanel Ćejvanović (2013) Design of single storey steel building with truss beams. EngD thesis.

Janko Lisjak (2013) Structural robustness of steel framed buildings. EngD thesis.

Gašper Kerševan (2013) Static analysis and design of the existing road bridge over the Sava river in Črnuče. EngD thesis.

Sonja Sukič (2013) Forces and stresses in the superstructure and in the formation of the railway track. EngD thesis.

Denis Bojanc (2013) Design of footbridge in Ribji trg. EngD thesis.

Anže Matko (2013) Project of a simply supoported steel road bridge with a span of 25m. EngD thesis.

Matic Skalja (2013) Design of simply supported composite bridge. EngD thesis.

Mihael Legen (2013) Fire design of steel building. EngD thesis.

Blaž Rupnik (2013) Design of three-story office building with composite columns and beams. EngD thesis.

Nika Gerbec (2013) Design of pedestrian suspended bridge over the river Tolminka. EngD thesis.

Bojan Fink (2013) Fire design of steel building. EngD thesis.

Adis Sinanović (2013) Footbridge over the Bruber canal. EngD thesis.

Rok Kurinčič (2013) Static analysis of a climbing wall. EngD thesis.

Darko Beg and Franc Sinur (2013) Popravek k diplomski nalogi: »Stabilnostna analiza jeklene strehe športne dvorane v Stožicah«, ki jo je izdelala Tina Pavlič (zagovor: 22.09.2012). Fakulteta za gradbeništvo in geodezijo, Ljubljana. (Submitted)

Gašper Lužar (2013) Detailed analysis of the effects of initial geometric imperfections on longitudinally stiffened plates. EngD thesis.

Matej Prevc (2013) Load bearing steel structures for industrial fabric buildings. EngD thesis.

Žiga Frantar (2013) Project of steel industrial building. EngD thesis.

Andjelka Stanić (2013) Optimisation of slender steel members with web openings. EngD thesis.

Tamara Rigler (2013) Stiffness and resistance of bolted connections. EngD thesis.

Sara Piculin (2013) Influence of transverse stiffeners on plate girder behaviour. EngD thesis.

Doris Frank (2012) Quay wall for berth 12 in port of Koper. EngD thesis.

Žiga Maček (2012) Static analysis of a hotel with steel support structure. EngD thesis.

Tina Pavlič (2012) Stability analysis of sports hall Stožice steel roof. EngD thesis.

Jan Hlastec (2012) Design of steel cylindrical tanks. EngD thesis.

Luka Vidic (2012) Comparison of technical regulations for seismic analysis of storage tanks. EngD thesis.

Matija Brecelj (2012) Longitudinally stiffened plate girders subjected to bending moments. EngD thesis.

Jure Pezdirc (2012) Design project of aluminium pedestrian bridge and summary of EC9. EngD thesis.

Matej Jereb (2012) Effect Of Elevated Temperatures On Steel Tanks. EngD thesis.

Matej Dakskobler (2012) Static analysis of a facility in steel realization. EngD thesis.

Gregor Polajnar (2011) Design of multi-storey office building. EngD thesis.

Anja Lavrič (2011) Use of coated fabric membranes for facade and roof systems of steel constructions. EngD thesis.

Jure Turk (2011) Static analysis of the production facility. EngD thesis.

Primož Janežič (2011) Static analysis of commercial centre with a steel supporting structure. EngD thesis.

Franc Sinur (2011) Behaviour of longitudinally stiffened plate girders subjected to bending-shear interaction. PhD thesis.

Marko Đuranović (2011) The project of the carying steel structure of an office building. EngD thesis.

Nace Remic (2011) BEARING RESISTANCE OF BOLTED CONNECTIONS MADE OF MILD STEEL GRADES. EngD thesis.

Damjan Sekereš (2011) Static calculation of three-storey office building. EngD thesis.

Peter Muhvič (2011) Project of logistics center in steel construction. EngD thesis.

Gregor Longar (2010) Different structural designs for a single storey buildings. EngD thesis.

Andraž Jakopin (2010) Design of steel business structure. EngD thesis.

Sandi Mohar (2010) Design project of a four-storey business building. EngD thesis.

Darko Kovačič (2010) Resistance of steel beams with web openings and castellated beams. EngD thesis.

Peter Zupančič (2010) Composite Steel and Concrete Railway Bridge Design Project. EngD thesis.

Alenka Pavček (2009) Design project of four-storey parking garage with composite floors. EngD thesis.

Urša Šolinc (2009) Razvoj stabilnih končnih elementov za velike deformacije. EngD thesis.

Jasmin Mustafić - Marjetič (2009) . EngD thesis.

Gašper Ziherl (2008) Design of composite bridge considering stages and sequence of construction. EngD thesis.

Tanja Vesel (2008) Ductility of concentric braces. EngD thesis.

Matej Kocjan (2008) Determination of optimal topology of structural components. EngD thesis.

Blaž Čermelj (2008) Response of steel structures to fire actions. EngD thesis.

Niko Kristanič (2008) Limit State Design Using Exact Sensitivity Analysis and Shape Optimization.. PhD thesis.

Primož Može (2008) Ductility and resistance of bolted connections in structures made of high strength steels. PhD thesis.

Sergej Bočko (2008) Limit Load of Bolted Connections. EngD thesis.

Tomaž Rugelj (2008) Application of injection bolts in steel structures. EngD thesis.

Nataša Aleksić (2007) Compression and bending resistance of longitudinally stiffened plate girders. EngD thesis.

Borislav Majkić (2007) Fire analysis of steel buildings with advanced methods. EngD thesis.

Eva Lovrenčič (2007) Comparison of different methods of seismic analysis on an example of a 15-storey steel building. EngD thesis.

Ivo Jereb (2007) Supporting structures for bridging. EngD thesis.

Franc Kralj (2007) Seismic analyis of steel high-rise building. EngD thesis.

Primož Kozlevčar (2007) Analysis of typical pallet racks under seismic conditions. EngD thesis.

Laura Grad (2006) Static analysis aluminium domes roofs of tanks. EngD thesis.

Domen Lazar (2006) Analysis of different types of ceilings in steel skeleton constructions. EngD thesis.

Milan Ognjanović (2006) Design of multipurpose steel building. EngD thesis.

Jože Borovšak (2006) Design of steel tanks for seismic loading. EngD thesis.

Gregor Čufer (2006) Design of Multistorey Building. EngD thesis.

This list was generated on pon. 18. dec. 2017 02:47:09 CET.