Items where Division is "Faculty of Civil and Geodetic Engineering > Department of Civil Engineering > Chair of Concrete, Masonry and Timber Structures"

Gregor Požar (2016) Design of reinforced concrete load-bearing structure of a residental building in Novo mesto. EngD thesis.

Dani Gabršček (2016) Tools for calculating the resistance of metal dowel-type connections of timber structures. EngD thesis.

Martina Lojk (2016) Multi-storey timber structures. EngD thesis.

Jan Perhaj (2016) Design of wooden projecting roof for cars. EngD thesis.

Rok Seifert (2016) Shear connection between steel beam and timber panel. EngD thesis.

Rok Štesl (2016) The impact of cement type on the bond between concrete and reinforcing steel. EngD thesis.

Maša Zupanc (2016) Design of timber footbridge across highway A2 on the section Kranj East - Brnik. EngD thesis.

Žiga Krofl (2016) Computer program for optimum design of reinforced concrete sections. EngD thesis.

Matic Zupančič (2016) Energy analysis of conceptual design of wooden multi-apartment modular building. EngD thesis.

Rok Krevs (2016) The design of wooden hayrack. EngD thesis.

Simon Brdar (2016) Design of single-family residential house in Škofljica. EngD thesis.

Gašper Selak (2016) The influence of steel fibres on bond between rebar and normal strenght concrete. EngD thesis.

Matjaž Povše (2016) Design of wooden roof of farm building. EngD thesis.

Lovrenc Gregorc (2016) Analysis of renovation of St. Florian's church in Fojana, Brda. EngD thesis.

Gregor Udovč (2016) Design of load-bearing structures of a detached house, steel carport and a reinforced concrete supporting wall. EngD thesis.

Luka Bele (2016) Behaviour of timber columNs under combined aXial and bending actions. EngD thesis.

Barbara Kralj (2016) Analysis of load-bearing structure of a multi-residential masonry building in Nova Gorica. EngD thesis.

Rok Fabjan (2016) Static calculation of the load-bearing structure of a simple wooden building in Novo mesto. EngD thesis.

Jan Kopač (2016) The influence of reinforcing bar diameter on bond between rebar and concrete. EngD thesis.

Uroš Bratkovič (2016) Effect of shape of the specimen and direction of casting on compressive strength of fibrous concrete. EngD thesis.

Igor Štupnik (2016) Fire safety of timber structures. EngD thesis.

Matej Bizjak (2016) Load-bearing systems of modern large span timber structures. EngD thesis.

Robert Šeligo (2016) Structural design of commercial building in Domžale. EngD thesis.

Boris Tomc (2016) The design of wooden roof-bearing structure of littoral house in Zalošče. EngD thesis.

Boštjan Končan (2016) Design of a wooden house. EngD thesis.

Blaž Klinc (2016) Influence of soil properties and mat foundation stiffness on the structural design. EngD thesis.

Slavko Dremelj (2016) Analysis of existing double linked hayrack to Eurocod standards. EngD thesis.

Žiga Domadenik (2015) Design of typical glued laminated timber beams. EngD thesis.

Peter Kürbus (2015) Design of reinforced concrete slab of the existing building. EngD thesis.

Alja Puš (2015) Design of built - up timber columns. EngD thesis.

Jaš Zakrajšek (2015) Load capacity and deformability of timber shear wall assembly. EngD thesis.

Katja Novak (2015) Static calculation of single family house on Jelični vrh. EngD thesis.

Blaž Juvanec (2015) Bond between fibre reinforced concrete and reinforcing bars. EngD thesis.

Andraž Dežman (2015) Bond between concrete and reinforcing steel. EngD thesis.

Urban Kralj (2015) Calculation of deflections of reinforced concrete beam. EngD thesis.

Nenad Bulić (2015) Optimal design of reinforced concrete beam with respect to bending moment and axial force. EngD thesis.

Eva Klemen (2015) Models for providing shear resistance of reinforced concrete elements subjected to shear. EngD thesis.

Urška Bajc (2015) Buckling Load of Reinforced Concrete Frames in Fire Conditions. PhD thesis.

Mirsad Rizvić (2015) Design of timber columns subjected to combined bending and compression. MSc thesis.

Luka Suzić (2015) Design of timber footbridge across river Sava Bohinjka near Bohinjska Bistrica. EngD thesis.

Marko Jovanovski (2014) Stressed skin design of single storey steel buildings. MSc thesis.

Sandi Stanič (2014) Analysis of the stress and strain state of prestressed "V" beam. EngD thesis.

Gašper Amon (2014) Design of typical load - bearing structures of a multi - storey office building in Logatec. EngD thesis.

Rok Udir (2014) Impact of internal water reservoirs and steel fibres content on shrinkage of high strength concrete. EngD thesis.

Ersan Ramadan (2014) Preparing of aids for practical design of reinforced concrete elements according to EUROCODE 2. EngD thesis.

Nika Šubic (2014) The impact of different lightweight aggregates on properties of high strength concrete. EngD thesis.

Nina Vogrič (2014) Autogenous shrinkage, speciality of high performance concretes. EngD thesis.

Jernej Ocepek (2014) Effect of wood grading on mechanical properties of glued laminated timber. EngD thesis.

Marko Avbar (2014) Design of load-bearing structure of a residential building. EngD thesis.

Andrej Fabiani (2014) Design of load-bearing parts of timber footbridge. EngD thesis.

Matija Cej (2014) Analysis and design of prestressed railway bridge deck. EngD thesis.

Blaž Kocina (2014) Comparison of different non-linear methods for seismic resistance of masonry structures. EngD thesis.

Alen Lulić (2014) Design of load-bearing structural elements made of cross laminated timber. EngD thesis.

Matic Meža (2014) Analysis and design of flat slabs. EngD thesis.

Primož Novak (2013) Analysis of load-bearing structure of a multi-storey office building in Idrija. EngD thesis.

Simon Vrbovšek (2013) Design of post - tensioned concrete slab. EngD thesis.

Živa Semolič (2013) Analysis and design of reinforced concrete load-bearing structure of a commercial building in Ljubljana. EngD thesis.

Anej Špacapan (2013) Design of composite wooden beams. EngD thesis.

Martin Rus (2013) Analysis and design of reinforced concrete load-bearing structure of a three storey office building in Ribnica. EngD thesis.

Grega Drčar (2013) Impact of internal water reservoirs on shrinkage of high strength concrete. EngD thesis.

Luka Kocman (2013) Analysis and design of load-bearing structure of a multi-residential building in Novo mesto. EngD thesis.

Dijana Maleš (2013) The influence of granulation on lightweight aggregate on early autogenous shrinkage of high strength concrete. EngD thesis.

Uroš Trošt (2013) Dimensioning of interstorey reinforced concrete plate of primary school in Ajdovščina. EngD thesis.

Damjan Lisec (2013) Impact of internal water reservoirs in high-strenght concretes on drying shrinkage. EngD thesis.

Jaka Brezočnik (2013) Timber frame load bearing structures made of roundwood. EngD thesis.

Dejan Semič (2013) Design and analysis of reinforced concrete load-bearing elements of a commercial building in Ljubljana. EngD thesis.

David Pukšič (2013) Analysis and design of flat slab. EngD thesis.

Uroš Sebastjan Belak (2013) Design of the integral concrete bridge. EngD thesis.

Mitja Jakše (2013) RC section design software for the calculation of axial - bending and shear strength. EngD thesis.

Rok Kržan (2013) Analysis and design of a multi - storey office building in Celje. EngD thesis.

Peter Banovec (2013) Analysis of a load-bearing multi-storey structure in Črnomelj. EngD thesis.

Luka Gramc (2013) Simplified calculation of RC structure deflections. EngD thesis.

Sandi Ostanek (2013) Design and analysis of energy consumption in terraced houses in the Primorska region. EngD thesis.

Nejc Pirc (2012) Design of multi - residental building made of reinforced concrete in community "Sončni Log" in Logatec. EngD thesis.

Matic Hribernik (2012) Design of the road bridge with timber load-bearing structure. EngD thesis.

Igor Krištof (2012) Large finger joints of glulam load-bearing elements in timber structures. EngD thesis.

Nejc Pavlin (2012) Strut and tie method for design of plane reinforced concrete elements. EngD thesis.

Blaž Pucelj (2012) Usage of Nemetschek frilo software in Practise. EngD thesis.

Klemen Erklavec (2012) Design and assesment of fire resistance of isolated RC column in a multi-storey office building. EngD thesis.

Matic Čoh (2012) Design of a reinforced concrete slab of the comercial building. EngD thesis.

Suzana Štiherl (2012) Design of a reinforced concrete commercial and residental building in Ljubljana. EngD thesis.

Gašper Tisovec (2012) Design of Reinforced Concrete shell elements. EngD thesis.

Jure Klopčič, gradbenik (2012) Design of load-bearing elements of a multiresidental building. EngD thesis.

Luka Possnig (2012) Design of load-bearing structure of an office building in Kranj. EngD thesis.

Špela Žnidaršič (2012) The influence of steel fibres content and pre-soaked lightweight aggregate on shrinkage of high strength concrete. EngD thesis.

Primož Zelenec (2012) The design of retaining and support wall for the purpose of wood storage. EngD thesis.

Kristjan Rojc (2012) Geotechnical design of reinforced concrete retaining wall. EngD thesis.

Nejc Legat (2012) Impact of internal water reservoirs on the compressive strenght of high strenght concrete. EngD thesis.

Gregor Grbec (2012) The use of modern wooden products in timber load-bearing structures. EngD thesis.

Aljaž Sitar (2012) Structural systems of modern timber structures. EngD thesis.

Janez Melink (2012) Design of interstorey structure in a reinforced concrete building. EngD thesis.

Anže Egart (2012) Fire curves and temperature profiles of reinforced concrete sections. EngD thesis.

Rožle Pavlin (2012) Design of CGP administrative building according to Eurocode standards. EngD thesis.

Matija Zajec (2012) Shrinkage of polypropylene fibre reinforced high strength concrete. EngD thesis.

Marko Hozjan (2012) Connections of timber elements made with punched metal plates. EngD thesis.

Iša Pliberšek (2012) Design of multi-storey timber framed office building and its load-bearing elements. EngD thesis.

Nana Krauberger and Sebastjan Bratina and Miran Saje and Simon Schnabl and Igor Planinc (2012) Inelastic buckling load of a locally weakened reinforced concrete column. Engineering Structures, 34 . pp. 278-288. ISSN 0141-0296

David Kokalj (2011) Simplified calculation methods for the fire design of RC bears. EngD thesis.

Andraž Savarin (2011) Design of timber roof. EngD thesis.

Robert Pečenko (2011) Proof of safety of prestressed hollow - core slab under normal and fire conditions. EngD thesis.

Marko Sodja (2011) Analysis of suggested improvement of the precast concrete structure. EngD thesis.

Šimun Kodžoman (2011) Comparison of design of glued laminated members according to standard Eurocode 5 and more detailed analysis by a computer program. EngD thesis.

Maja Golubovič (2011) Modern load-bearing systems of wooden roofs of engineering buildings. EngD thesis.

Robert Lamovšek (2011) Design of structural members of reinforced concrete building " Youth hostel ". EngD thesis.

Aleš Pančur (2011) Comparison of a commercial and warehouse building execution using different formwork systems. EngD thesis.

Sašo Vozel (2011) Design of timber lookout tower. EngD thesis.

Mojca Mohorič (2010) The structural systems of modern wooden roofs. EngD thesis.

Mirsad Rizvić (2010) Design of reinforced concrete plate elements according to Eurocode 2. EngD thesis.

Dragoljub Šećerov (2010) Design of load-bearing elements of the commercial building. EngD thesis.

Amel Hodžić (2010) Design of the load-bearing structure of the prestressed highway overpass otes: 117 pages, 25 tables, 69 figures. EngD thesis.

Matevž Jerman (2010) Structural composit lumber. EngD thesis.

Marko Keše (2010) Design of multiresidental building in Kočevje according to Eurocode standards. EngD thesis.

Gregor Novak (2010) ANALYSIS OF PRESTRESSED CONCRETE SLABS OF THE "EMONIKA" BUILDING. EngD thesis.

Jože Ban (2010) Analysis of prestressed double pitch concrete beam. EngD thesis.

Dejan Kastelec (2010) Design of pocket foundations. EngD thesis.

Špela Kemperle (2010) Design of load – bearing structure dwelling house. EngD thesis.

Miha Pirih (2010) Design of concrete structures using the strut and tie model. EngD thesis.

Blaž Goljevšček (2010) Bearing capacity analysis of RC “pi” slab under normal and fire conditions. EngD thesis.

Jure Ferjančič (2010) Static calculation of commercial storage facility to the standard Eurocode. EngD thesis.

Klemen Sinkovič (2010) The technology of building bridges with launching technique. EngD thesis.

Ožbolt Seničar (2010) Design of a Load Carrying Structure of a Dwelling-House. EngD thesis.

Vedran Mekić (2010) Contemporary technologies for building bridges. EngD thesis.

Gorazd Rajh (2010) The significance of steel fibre reinforced shotcrete’s early strength on tunnel concrete lining design. EngD thesis.

Matjaž Jelušič (2009) Compressive Strength of Fibre Reinforced Concrete. EngD thesis.

Darja Medved (2009) Nonlinear analysis of two-layer timber beams. EngD thesis.

Miha Jereb (2009) Design of reinforced concrete floor panel in the precast concrete structure. EngD thesis.

Jure Zdovc (2009) Design of bottling plant according to the European standards Eurocode. EngD thesis.

Rok Kržan (2009) Analysis and compliance assessment of an existing precast building according to european standards. EngD thesis.

Ana Kozjan (2009) Composite structure made of concrete and timber. EngD thesis.

Marijan Koren (2008) Material consumption management in the production of precast elements. EngD thesis.

Nana Krauberger (2008) Analysis of prestressed concrete structures exposed to fire. PhD thesis.

Blaž Velkavrh (2007) Comparison of approaches for deep beam design. EngD thesis.

Marko Arlič (2007) Design of structural members of the prefabricated reinforced concrete building. EngD thesis.

Nana Krauberger and Miran Saje and Igor Planinc and Sebastjan Bratina (2007) Exact buckling load of a restrained RC column. Structural engineering and mechanics, 27 (3). pp. 293-310. ISSN 1225-4568

Špela Zaletel (2007) Suitability of Using High Strength Concrete. EngD thesis.

Miha Frelih (2007) Load-bearing structure of prefabricated industrial building. EngD thesis.

Jože Bartol (2007) Problem of punching shear in slabs on culumns. EngD thesis.

Urška Sodja (2007) Design of bearing structures of dwelling - house. EngD thesis.

Sebastjan Bratina and Miran Saje and Igor Planinc (2007) The effects of different strain contributions on the response of RC beams in fire. Engineering Structures, 29 (3). pp. 418-430. ISSN 0141-0296

Milan Borštnar (2006) Analysis and design of two ten storey buildings according to PBAB and EC. EngD thesis.

Andrej Koglot (2006) Nonlinear fire analysis of RC beams according to the Eurocode 2. EngD thesis.

Mojca Markovič (2006) Ultimate Bearing Capacity of RC Cross-sections in Biaxial Bending. EngD thesis.

Mojca Horvat (2006) Elaboration of tables and graphs for the design of reinforced concrete cross-sections according to european standard EN 1992-1- 1:2004. EngD thesis.

Leon-Boris Južnič (2006) Analysis and design of beams of reinforced concrete slabs with ribs. EngD thesis.

Sebastjan Bratina and Bojan Čas and Miran Saje and Igor Planinc (2005) Numerical modelling of behaviour of reinforced concrete columns in fire and comparison with Eurocode 2. International Journal of Solids and Structures, 42 (21-22). pp. 5715-5733. ISSN 0020-7683

Bojan Čas and Sebastjan Bratina and Miran Saje and Igor Planinc (2004) Non-linear analysis of composite steel-concrete beams with incomplete interaction. Steel & composite structures, 4 (6). pp. 489-507. ISSN 1229-9367

Sebastjan Bratina and Miran Saje and Igor Planinc (2004) On materially and geometrically non-linear analysis of reinforced concrete planar frames. International Journal of Solids and Structures, 41 (24-25). pp. 7181-7207. ISSN 0020-7683

Sebastjan Bratina and Igor Planinc and Miran Saje and Goran Turk (2003) Non-linear fire-resistance analysis of reinforced concrete beams. Structural engineering and mechanics, 16 (6). pp. 695-712. ISSN 1225-4568