Measurement of setting process of cement pastes using non-destructive ultrasonic shear wave reflection technique

Gregor Trtnik in Marko Ivan Valič in Goran Turk (2013) Measurement of setting process of cement pastes using non-destructive ultrasonic shear wave reflection technique. NDT & E International, 56 . str. 65-75. ISSN 09638695

Predogled

PDF - Sprejeta verzija Prenos (1682Kb)

Povzetek

In this paper a new setup for measuring, setting and hardening process of cementitious materials, using a non-destructive ultrasonic shear wave reflection technique and design with the objective to be easily used in-situ, is described. Using the developed setup, the measurements can be performed by slight deepening of a measuring head into a paste in a mold or by placing the paste into a mold fixed on a measuring head. To test the proposed methodology, cement pastes with different compositions were prepared and exposed to different curing temperatures. Significant differences in the evolution of a change of a shear wave reflection coefficient Δr in time were observed, indicating the ability of the method to monitor setting process of cement pastes. Moreover, some interesting phenomena in the solidification process of the materials can be identified. A linear relationship between development of Δr and penetration resistance dP values in time was found, allowing development of a simplified procedure to determine both initial and final setting times of the material.

Akcije (potrebna je prijava)